VOS3000 call transfer, hold and pickup
VOS3000 phones can transfer, hold and pick up calls with star codes. These are the keys and the settings behind them.
Updated · By the VOS3000 Web team
Quick answer: VOS3000 phones transfer calls with keys: *1 starts a blind transfer, *2 an attended transfer, *3 a pickup transfer, # confirms and ** cancels. *9 holds a call and *4 picks up a call. All keys are softswitch parameters you can change.
- Blind transfer
- *1
- Attended transfer
- *2
- Confirm / cancel
- # / **
- Hold / pickup
- *9 / *4
The keys
These are the defaults from the VOS3000 2.1.9.07 manual. Each is a softswitch parameter under Operation management → Softswitch management → Additional settings → System parameter.
| Key | What it does | Parameter |
|---|---|---|
| *1 | Start a blind transfer | SS_CALL_TRANSFER_NORMAL_KEY |
| *2 | Start an attended (inquiry) transfer | SS_CALL_TRANSFER_ASK_KEY |
| *3 | Start a pickup transfer | SS_CALL_TRANSFER_WAIT_ACCESS_KEY |
| # | Confirm the transfer | SS_CALL_TRANSFER_END_KEY |
| ** | Cancel the transfer | SS_CALL_TRANSFER_CANCEL_KEY |
| *** | Cancel a call service | SS_CALL_SERVICE_CANCEL_KEY |
| *9 | Hold the call | SS_CALL_HOLD_KEY |
| *4 | Pick up a call | SS_CALL_PICK_UP_KEY |
Blind and attended transfer
Blind: during the call press *1, dial the new number and press #. The call goes straight to the new number. Attended: press *2, dial the number and #, talk to the new person, then complete or cancel with **. SS_CALL_TRANSFER_ASK_DISPLAY (Original caller) sets which number the new person sees, and SS_CALL_TRANSFER_REMOTE_RING_PASS_THROUGH (On) plays the ring-back tone to the caller while they wait. SS_DTMF_TIMEOUT (5 seconds) is how long VOS3000 waits for the next key.
Pickup transfer: move a call to another phone
Use it when someone answers on one phone and wants to continue on another:
- On the first phone, press *3, an access code of your choice and #. The first phone hangs up and the caller waits.
- On the second phone, dial the pickup key and the same access code within SS_CALL_TRANSFER_WAIT_ACCESS_TIMEOUT (120 seconds), and the call continues there.
The manual adds one setting: put the pickup key in the system's free special service numbers (the free numbers that still create a bill), or the transfer fails because the callee cannot be billed. See system parameters.
When a transfer fails
- Keys do nothing: VOS3000 is not receiving the DTMF. Match the DTMF mode of the phone and the gateway, usually RFC2833; see codecs and DTMF.
- Transfer to an outside number fails: the transferring phone's account needs balance and permission for that destination.
- Forwarding (on busy, no answer or always) is set per phone, not with keys; see SIP phones.
Questions about this topic
How do I transfer a call on a VOS3000 phone?
During the call press *1, dial the new number and press # for a blind transfer. Use *2 instead to talk to the new person first.
Why does call transfer not work?
Usually DTMF does not reach VOS3000: check that the phone sends DTMF the way the gateway expects, for example RFC2833. For pickup transfer, the key must also be in the free numbers list.
Can I change the transfer keys?
Yes. Every key is a softswitch system parameter, such as SS_CALL_TRANSFER_NORMAL_KEY.
Try every step in the live demo
Each screen in this guide is in the VOS3000 Web demo, with made-up data. Sign in with demo / demo.
Keep reading
SIP phones
Add phones, use the setup wizards, and set call forwarding, DND and voice mail.
Codecs and DTMF
Auto or specified codecs, transcoding, G729 modes, RFC2833 and SIP INFO.
IVR, callback and audio services
Direct dial and callback, IP PBX, conference and call center modules.
System parameters
Where the SERVER_ and SS_ parameters are, and the billing, CDR and call ones worth knowing.