Why your VOS3000 minutes differ from the carrier's
A gap of a few percent between your CDR and a carrier's invoice is common. Most of it can be explained, and the rest is what you dispute.
Updated · By the VOS3000 Web team
Quick answer: Your VOS3000 minutes and a carrier's rarely match exactly, because each side rounds calls by its own billing cycle and first time duration, counts short and failed calls differently, and may cut the day in a different time zone. Compare call by call on Call duration first, then on Charged duration.
- Rounding
- Billing cycle, rounded up
- Real length
- CDR Call duration
- Billed length
- CDR Charged duration
- Second precision
- SERVER_BILLING_HOLD_TIME_PRECISION
1. Rounding by the billing cycle
Each VOS3000 rate has a First time rate and First time duration, then a Billing rate charged per Billing cycle. Time beyond the first duration is split into billing cycles and always rounded up. The manual's example: first time rate 0.21 for 180 seconds, then 0.15 per 60 seconds; a 250 second call costs 0.21 + 0.15 × 2 = 0.51. A Section rate, if set, is used first.
The carrier does the same with its own increments, which may not be yours. Ten thousand calls of 61 seconds are 10,167 minutes at 1/1, 11,000 minutes at 6/6 and 20,000 minutes at 60/60. So check that the vendor rates in VOS3000 use the carrier's actual increments. See VOS3000 rates.
2. Rounding to the second
Before the billing cycle, VOS3000 turns milliseconds into whole seconds with SERVER_BILLING_HOLD_TIME_PRECISION (default 1000 ms). Set to 50, 21.049 s counts as 21 s and 21.050 s as 22 s. With the default, the manual's CDR example counts a 1.001 second call as 2 seconds. Over millions of short calls, a half-second difference in rounding is real money.
3. Real length vs billed length
The CDR (Navigation → Data query → Cdr) has both Call duration, the actual length, and Charged duration, the length after the billing cycle. Compare the carrier's seconds with Call duration first: if those match, the gap is only rounding. Call charges is what you bill the customer and Call expense what the call costs you. Also note SERVER_BILLING_FREE_TIME (default 0): it cuts the charged duration but not the conversation time; see free time.
4. Answer time and short calls
Calls are normally billed from the answer (the SIP 200 OK) to the BYE. If a carrier answers early, before the far end really picks up, it bills ringing time you may not bill on. Look for many calls with a few seconds of duration and a SIP 200 OK straight after 183 Session Progress. Calls with no talk time also differ: VOS3000 keeps zero-length CDRs while SERVER_BILLING_RECORD_ZERO_HOLD_TIME is On, and a mapping gateway can drop them with Not recorded no hold time cdr. Count only answered calls on both sides.
5. Time zones and period edges
If the carrier bills in UTC and your server runs local time, a monthly invoice starts and ends hours apart from your report. Calls across midnight can also fall in different days. Ask which time zone the carrier uses and query your CDR for the same window. See server settings for the server time zone.
How to compare
- Get the carrier's call-level CDR, not just the invoice total.
- Export your CDR for the same window, in the same time zone, filtered on that routing gateway.
- Match calls on callee number and start time, within a few seconds.
- List calls only one side has, then calls whose durations differ by more than one second.
- Re-rate the matched calls with the carrier's increments. What is left is your dispute.
If the carrier also runs VOS3000, bilateral reconciliation does this in real time.
Questions about this topic
Why are my VOS3000 minutes different from my carrier's?
Usually because the two sides round calls differently (billing cycle and first time duration), count short or zero-length calls differently, or cut the period in different time zones.
What is the difference between Call duration and Charged duration?
Call duration is the real length of the call. Charged duration is the length used for billing, rounded by the rate's billing cycle.
How does VOS3000 round a call of 61 seconds?
By the billing cycle of the matching rate, always up. With a 60 second first time duration and billing cycle it is billed as 120 seconds; with 6 seconds, as 66 seconds; with 1 second, as 61 seconds.
Can VOS3000 check billing with a carrier automatically?
Only if the carrier also runs VOS3000 or VOS5000, with bilateral reconciliation. With other carriers, compare CDRs by hand.
Run VOS3000 without the server work
Pick a VOS3000 server hosted by us, or have us install VOS3000 on your own server. VOS3000 Web and the Android app come with it.
Keep reading
Rate groups and rates
Create rate groups, add rates and bill customers per second or per minute.
Search and read CDR
Find calls, read every CDR column and understand termination reasons.
Bilateral reconciliation
Check billing against a partner VOS3000 in real time and get an alarm when the two disagree.
Reports and analysis
Revenue, clearing and gateway reports, and which one answers which question.