VOS3000 fix

VOS3000 no ringback or wrong ringback

Callers who hear silence while the number rings often hang up before it is answered. Find out who should be playing the tone first.

Updated · By the VOS3000 Web team

Quick answer: Silence before answer usually means the carrier sent SDP for early media but no ringback audio. Turn on Auxiliary ring tone on the customer's mapping gateway, with media proxy on, and VOS3000 plays its own tone until the carrier's audio arrives. Remote ring back mode sets which ringing message the customer receives.

Fallback tone
Auxiliary ring tone
Needs
Media forwarding (media proxy) on
Delay before the tone
SS_AUXILIARY_RING_TONE_ACTIVATION_DELAY
Ringing sent to customer
Remote ring back mode

Where ringback comes from

There are two ways a caller hears ringing:

  • Local ringback: the carrier sends 180 Ringing without SDP, and the caller's phone or switch plays its own tone.
  • Early media: the carrier sends 183 Session Progress (or 180) with SDP, then sends the ringback, an announcement or a song as RTP. With SDP in the ringing message, most devices play that audio and not their own tone.

Silence happens when there is SDP but no RTP: the carrier never sends audio, or it cannot reach the caller. Capture a call with debug trace to see which message arrives.

Symptoms and fixes

SymptomUsual causeWhat to do
Silence until answer, on one carrier183 with SDP but no early RTPAuxiliary ring tone, or ask the carrier to send ringback.
Silence on every carrierRTP does not reach the caller (NAT)See media proxy.
Strange tone, message or musicThe carrier's own early mediaIt is the carrier's audio; ask them, or use another route.
Customer's switch wants another ringing messageIts equipment expects 180 or 183 with SDPRemote ring back mode on their mapping gateway.
Ringing never stopsThe callee does not answerSS_SIP_TIMEOUT_RINGING, 120 seconds; see SIP timeouts.

Auxiliary ring tone

Tick Auxiliary ring tone in the mapping gateway's Additional settings → Normal, or in a phone's Advanced configuration → Normal. When media forwarding is on and no RTP comes from the called side within the activation delay after its SDP, VOS3000 plays its own ring tone through local RTP. When the called RTP arrives, VOS3000 passes it through instead, so real carrier audio is never hidden.

  • It needs media forwarding. With media proxy off, the RTP does not pass through VOS3000, and nothing is played. Set Media proxy to On for the gateway if Auto does not turn it on; this uses server bandwidth.
  • The delay is the system parameter SS_AUXILIARY_RING_TONE_ACTIVATION_DELAY under Softswitch management → Additional settings → System parameter. The manual gives no default, so check the value on your server.

Worked example: customer A reports 10 seconds of silence before answer on one carrier. The trace shows 183 Session Progress with SDP and no RTP. Set media proxy to On and tick Auxiliary ring tone on A's mapping gateway: A now hears a tone after the delay, and any real carrier audio still gets through.

Remote ring back mode

In the mapping gateway's Additional settings → Protocol → SIP, Remote ring back mode sets what the customer receives while the callee rings:

  • Passthrough: follows the routing gateway. Start here.
  • 183 Session Progress + SDP or 180 Alerting + SDP: sent to the mapping gateway when the callee rings.

With SDP in the ringing message, most customer devices stop playing their own ringback, so choose these only when the customer's equipment needs them.

Ringback during call transfer

SS_CALL_TRANSFER_REMOTE_RING_PASS_THROUGH (On) sends the color ring back tone to the caller while a transfer rings.

Questions about this topic

Why is there no ringback tone on my VOS3000 calls?

Usually the carrier sent SDP in 183 Session Progress, so the caller's phone waits for ringback audio instead of playing its own, but no audio came. Auxiliary ring tone, with media proxy on, fills that gap.

Why does Auxiliary ring tone not play?

It only works when media forwarding (media proxy) is on for the call, and only after the activation delay with no audio from the called side.

Will Auxiliary ring tone hide the carrier's own ringback?

No. As soon as RTP arrives from the called side, VOS3000 passes that audio to the caller instead of its own tone.

What is the color ring back tone setting?

SS_CALL_TRANSFER_REMOTE_RING_PASS_THROUGH, On by default. It sends the ring-back tone to the caller while a call transfer is ringing.

Run VOS3000 without the server work

Pick a VOS3000 server hosted by us, or have us install VOS3000 on your own server. VOS3000 Web and the Android app come with it.