How to add a routing gateway in VOS3000
A routing gateway is where your calls leave the switch for a vendor or carrier. Here is how to add one and control which calls it carries.
Updated · By the VOS3000 Web team
Quick answer: A routing gateway is where VOS3000 sends calls out to a vendor or carrier. Create the vendor account, then add a routing gateway with the vendor, a prefix, the carrier's IP address and SIP port (usually 5060), a line limit and a priority.
- Used for
- Vendor (outgoing) traffic
- Required
- Vendor, gateway name, prefix, server IP
- Default SIP port
- 5060
- Stop traffic
- Lock Type: Bar All Calls
- Least cost
- Check rate plus Sort by lowest rate per second
Before you start: the vendor account
Each routing gateway belongs to a vendor account, so VOS3000 can record what each call costs you. In VOS3000 Web open Accounts → Vendor and add the vendor first.
Add the routing gateway
Open Gateways → Routing and click Add Routing. The same fields appear in the VOS3000 desktop client.
- Vendor: the account that carries these calls.
- Gateway Name: a unique name, for example the carrier and route.
- Prefix: required. The called-number prefixes this gateway may carry, for example 44 for UK numbers.
- Limit: the most calls you may send to this vendor at the same time.
- Priority: the gateway's priority against other gateways for the same prefix.
- Lock Type: No Lock to send calls, or Bar All Calls to stop them.
- Protocol and Port: SIP, on port 5060 unless your carrier uses another.
- Gateway Type: Static, Dynamic or Registration.
- Server IP: the carrier's signalling IP address.
After saving, you can change Limit, Priority, Prefix and IP straight from the routing gateway list in VOS3000 Web.
Choosing between several routes
When more than one routing gateway can carry a number, these settings decide which one is used:
- Priority on each routing gateway.
- Routing strategy on the customer's mapping gateway (Additional Settings → Routing settings): a first and second strategy of None, Connected ratio or Lowest rate per second.
- Check rate and Sort by lowest rate per second on the routing gateway, for least-cost routing. Sorting by lowest rate needs Check rate to be on.
Signalling timeouts
Under Additional Settings → Protocol → SIP, a routing gateway has signalling timeouts in seconds for Invite, Trying, Ringing and Session Progress (183). Shorter timeouts move a call to the next route sooner when a carrier does not answer.
Watch the route
Reports → Routing Analysis shows each routing gateway hour by hour and week by week. Watch ASR (the share of calls that connect) and ACD (the average call length): a sudden drop usually means a carrier problem. In the CDR, these termination reasons point at the route:
- RoutingGatewayAbnormal (-61): the gateway could not be used.
- CallSetupTimeout (-27) and 408 Request Timeout: the carrier did not answer in time.
- NoAnswer (-43): the called party did not answer.
In the VOS3000 desktop client
Open Operation management → Gateway operation → Routing gateway and click Add. Fill in Gateway name, Gateway prefix, Prefix mode, Lock type, Line limit, Priority, Ip and the Routing clearing account (the vendor), then click Apply. The routing gateway wizard sets the signalling port to 5060 by default. Operation management → Gateway operation → Online routing gateway shows which routing gateways are online.
Questions about this topic
How do I stop sending calls to a vendor quickly?
Set the routing gateway's Lock Type to Bar All Calls. In VOS3000 Web you can switch it straight from the gateway list, and switch it back to No Lock later.
How do I send calls to the cheapest vendor?
Turn on Check rate and Sort by lowest rate per second in the routing gateway's Additional Settings. Sorting by lowest rate needs Check rate to be on.
Which port should a routing gateway use?
The SIP port your carrier gives you. Most carriers use 5060, which is the default.
Why do calls fail with RoutingGatewayAbnormal?
VOS3000 could not use the routing gateway. Check the carrier's IP address and port, that the gateway is not locked, and that the carrier answers on that address.
Try every step in the live demo
Each screen in this guide is in the VOS3000 Web demo, with made-up data. Sign in with demo / demo.
Keep reading
Routing order and LCR
How VOS3000 sorts routing gateways: prefix, priority, ASR, lowest rate, and when it fails over.
Lowest profit rate limit
Stop routing calls at a loss: Lowest profit rate limit, Sort by lowest rate per second and Desired profit.
SIP OPTIONS checks on routing gateways
Options online check: how VOS3000 probes a carrier with OPTIONS, switches IP and port, and stops using a dead route.
Calls per second (CPS) limits
Keep within a carrier's CPS with Rate limit, watch Call per second, and plan for dialer bursts and failover.